Computational investigation toward selective collection of water particles containing odorous molecules by electrostatic spraying

The necessity of odor sensing has been increasing from environmental and health standpoints. Here, we propose the novel concept of a small device which can select odor molecules based on electrostatic spraying. For high selectivity of the target gas or odor, we conducted computational fluid dynamics coupled with an electrostatic field, as well as measurements by particle image velocimetry and anemometry. The computational model successfully reproduced characteristic features of ionic wind. Different trajectories of charged particles were computationally obtained owing to their electrical mobility. The results imply that different materials might be separated by the arrangement of the collecting electrode.     

Material profile influences in bulk‐heterojunctions

The morphology in mixed bulk‐heterojunction films are compared using three different quantitative measurement techniques. We compare the vertical composition changes using high‐angle annular dark‐field scanning transmission electron microscopy with electron tomography and neutron and x‐ray reflectometry. The three measurement techniques yield qualitatively comparable vertical concentration measurements. The presence of a metal cathode during thermal annealing is observed to alter the fullerene concentration throughout the thickness of the film for all measurements. However, the absolute vertical concentration of fullerene is quantitatively different for the three measurements. The origin of the quantitative measurement differences is discussed. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 1291–1300     

Dynamic release process of pollutants during suspended sediment transport in aquatic system

Pollutants release is highly consistent with suspended sediment concentration （SSC） in water column, especially during re-suspension and transport events. The present research focuses on pollutant dynamic release from re-suspended sediment, especially the vertical distribution relationship between them. The sediment erosion experiments on a series of uniform flow are conducted in a circulate flume. Reactive tracer （phosphorus） is used as the contaminant in fine-grained sediments to identify the release characteristic length and time. Experimental results show that the flow condition near-bed depends on the sediment surface roughness. The region with high turbulent intensities corresponds to a high concentration sediment layer. In addition, the SSC decreases with the distance, water depth, and particle grain size. The sediment in a smaller grain size takes much more time to reach equilibrium concentration. Total phosphorus （TP） concentration changes along the water depth as SSC in the initial re-suspension stage, appearing in two obvious concentration regimes： the upper low-concentration layer and the high-concentration near-bottom layer. This layered phenomenon remains for about 3 hours until SSC distri- bution tends to be uniform. Longitudinal desorption plays an important role in long-way transport to reduce the amount of suspended sediment in water column.     

Liquid crystalline properties of 4‐hexyloxybenzylidene‐4′‐alkyloxyanilines

The liquid‐crystalline polymorphism of the homologous series of 4‐hexyloxybenzylidene‐4′‐alkyloxyanilines is investigated. Basing on the polarization microscopy (POM, TOA), the DSC calorimetry and miscibility studies the following mesophases were detected: nematic, smectic A, smectic C and smectic I. The phase diagrams of the compounds of these series with 4‐hexyloxybenylidene‐4′‐pentylaniline (as the standard of mesophases) show induction of the smectic F mesophases. Their dependence on the alkyl chain length and mole fraction is shown.     

Fast switching of vertically aligned negative liquid crystals by optically hidden relaxation

We propose a method for fast switching of vertically aligned (VA) negative liquid crystals (LCs) by hiding the relaxation process of LCs. During the turn-off process, a strong in-plane electric field is applied for a short duration of time instead of relying solely on the slow relaxation of LCs. The LC molecules are rotated to the transmission axis of one of the polarisers by the applied in-plane electric field, resulting in turn-off switching that is 5.8 times faster than that of a conventional VA cell. By applying an overdriving scheme, we experimentally obtained a total response time of 3.3 ms.     

Fabrication of photoluminescent liquid crystal device using an in situ self-assembled molecular layer of a pyrene derivative

An in situ self-assembled molecular layer of 1-pyrenesulfonic acid sodium salt as an alignment agent was formed on indium tin oxide substrates for vertically aligning liquid crystals (LCs). The thus-aligned LCs exhibited uniform vertical alignment under crossed polarisers. The electro-optical characteristic of the LC cell fabricated using this method exhibited better performance than those of conventional LC cells with a polyimide alignment layer. Because the proposed alignment method is a simple one and involves low concentrations of the alignment agent (0.05 wt%), it is highly cost-effective. Further, the pyrene derivative, when mixed with LCs, exhibited photoluminescence (PL) under ultraviolet light. Given that the proposed method resulted in highly vertically aligned LCs and the alignment agent exhibited PL, the method should find wide use in the fabrication of colour-filter-free LC displays.     

Three‐dimensional vortex simulation of unsteady flow in hydraulic turbines

On the basis of the Helmholtz decomposition, a grid‐free numerical scheme is provided for the solution of unsteady flow in hydraulic turbines. The Lagrangian vortex method is utilized to evaluate the convection and stretch of the vorticity, and the BEM is used to solve the Neumann problem to define the potential flow. The no‐slip boundary condition is satisfied by generating vortex sticks at the solid surface. A semi‐analytical regularization technique is applied to evaluate the singular boundary surface integrals of the potential velocity and its gradients accurately. The fast multipole method was extended to evaluate the velocity and velocity gradients induced by the discretized vortex blobs in the Lagrangian vortex method. The successful simulation for the unsteady flow through a hydraulic turbine's runner has manifested the effectiveness of the proposed method. Copyright © 2011 John Wiley & Sons, Ltd.     

Control of a turbulent flow separated at mid-chord along an airfoil with DBD plasma actuators

The goal of the present experimental study is to investigate the ability of surface DBD plasma actuators to delay flow separation along the suction side of a NACA0015 airfoil. Three single surface DBD actuators that can operate separately are mounted on the suction side of the profile, at 18%, 27% and 37% of the chord length. The boundary layer is transitioned by a tripper to be sure that the flow control is not due to the laminar-to-turbulent transition. The angle of attack is equal to 11.5° and the free-stream velocity to U₀ = 40 m/s, resulting in a chord-based Reynolds number of Re_c = 1.33 × 10⁶. The flow is studied with a high-resolution PIV system. In such conditions, the baseline flow separation occurs at 50% of chord. Then, the different single DBD have been switched on separately, in order to investigate the actuator location effect. One highlights that the DBD located at x_c/c = 18% is more effective than the two others ones, with a separation delay up to 64% of chord. When the three DBDs operate simultaneously, the separation point moves progressively toward the trailing edge when the high voltage is increased, up to 76% of chord at 20 kV. Finally, the effect of the actuation frequency on the control authority has been investigated, by varying the value of the operating frequency and by burst-modulation. For frequencies equal to 50 Hz and 500 Hz (reduced frequency F⁺ = 0.31 and 3.1), the separation has been delayed at 76 and 80% of chord, respectively.     

Evolution of downsized crescent-shaped dune in wind tunnel experiment

The migration of a downsized crescent-shaped dune was investigated in a wind tunnel experiment.Quantified upwind influx and vertical oscillation of the sand bed were introduced to modulate the saturation level of the sand flux above the dune surface to affect dune evolution.The evolution was recorded by top-view photography and then abstracted as the evolution of self-defined characteristic quantities using a digital image processing algorithm.The results showed that,in contrast to the case for spanwise quantities,the evolution of streamwise quantities corresponds to a linear increase in the modulation magnitude more positively and in a monotonic and convergent manner.In contrast with quantities on the windward face,the changes in quantities with respect to the horns were nonmonotonic with time and almost uncorrelated with the variation in modulation strength,which reveals the distinctiveness of leeside evolution.